ProJect RPM 6.1SB Belt Drive Turntable

An oldie but a goodie from ProJect!  A belt drive turntable that has 3 speeds - 33,45 and 78 RPM.
 
It's fully manual - great for those who enjoy immersing themselves in the listening experience. 
 
It comes fully serviced with a new belt and a new Audio Technica AT-VM95E cartridge and stylus
 
Some details from the specs:
 
Turntable 
„ A quiet running AC motor with a two-step pulley drives the acrylic hub and platter via a flat-ground belt. 
„ The medium density fibre plinth stands on three height-adjustable Sorbothane®-damped aluminium cones. 
„ The motor is decoupled from the plinth to reduce vibration transmission. 
„ The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre platter, a 4mm thick flat-ground layer of vinyl 
„ The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs. 
„ Electronic speed change for 33/45 r.p.m.. Switching to 78 r.p.m. is done manually.
„ Central metal block optimises centre of gravity and damps main bearing. 
„ Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided. 
„ External power supply avoids potential electro-mechanical interference. 
 
Tonearm Pro-Ject 9c
„ Conical carbon-fibre armtube avoids standing wave reflections. 
„ Low mass aluminium headshell securely glued to armtube. 
„ The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes. 
„ Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances. 
„ Design of counterweight effectively counteracts unwanted resonances. 
„ The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 10 - 15g, 9 - 11g or 4 - 6g are available as an accessory part. 
„ Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing 
warped records. 
„ Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). 
„ Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. 
„ Silicone-damped armlift can be adjusted to suit working height of the arm. 
„ The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. 

Dimensions W x H x D: 385 x 170 x 330mm. Dust cover Cover it optional. W x H x D: 460 x 225 x 365mm.